APPLICATION
2010-2014 Hyundai Genesis Coupe 2.0T
SHIPPING STATUS: Manufacturer
Fidanza aluminum flywheels are made from the highest quality 6061 T6 aluminum. The material is fantastic for strength, heat dissipation and of course reduction in weight.
BODY
6061 T6 ALUMINUM Tolerances machined to +/- .001 6061 T6 has an ultimate tensile strength of at least 42,000 psi and a yield strength of at least 35,000 psi.
RING GEAR
1050 STEEL / HEAT TREATED Heat treated for durability. The gears are heated then pressed on and secured with grade 8 button screws.
REPLACEABLE FRICTION PLATE
1045 STEEL The friction surface we use is an incredibly strong 1045 steel. The plates are milled to meet our high specifications. With these replaceable plates there is no need to replace the entire flywheel when the clutch or flywheel is at the end of it’s life, saving time and money.
BUTTON SCREWS
GRADE 8 Increased security helping fasten the ring gear to the flywheel.
FASTENERS
MILITARY SPEC Military grade aerospace fasteners aid in pulling heat away from the clutch face. Properly spaced for form and function.
STEPPED DOWELS
STEEL Once pressure plate is installed they become locked in place. First in the industry to implement the use of stepped dowels.
NOTE: Replacing your OEM flywheel with a light weight flywheel may cause gear noise or a vibration that may not be suitable for everyone. The lighter the flywheel the more gear noise will be produced. Depending on the application Clutch Masters usually recommends Steel flywheels rather than Aluminum flywheels since Aluminum flywheels will cause more gear noise. Aluminum flywheels are usually only recommended for race applications looking to have the least amount of weight as possible. A light weight flywheel may affect the life expectancy of a clutch kit depending on the application.
CLUTCH RETURNS
Clutch kits can only be returned if the incorrect part was shipped. Please keep in mind that 100% of all clutch kits that have been returned, have had absolutely no fitment or quality issues. The main issues we are finding with returns are improper installation, wrong part ordered, improper break-in procedure, and mechanic refuses to install any other clutch but the one purchased from him. For these reasons we ask that you research the parts and the installation process to ensure everything is correct. If your vehicle utilizes a Dual Mass Flywheel, please research to make sure your part does not require the flywheel to be changed. Any issues with installation, fitment, or quality should be brought to the attention of the manufacturer directly. All sales on clutch orders are final.
